When was masonite siding discontinued?

Asked by: Eleanor Adams  |  Last update: 29 June 2021
Score: 4.2/5 (63 votes)

This stipulated that owners of properties constructed using hardboard siding from January 1, 1980 through January 15, 1998, depending on the manufacturer, could be reimbursed for any damages caused by the product. Following this, nearly all manufacturers stopped producing Masonite siding.

View full answer

Hereof, Is Masonite siding still made?

While Masonite siding is no longer produced, fiber-cement siding makes an excellent substitute. There is no need to replace all the siding at once, unless the damage is widespread.

Similarly one may ask, When did they stop making Masonite siding?. As a result of the lawsuit, nearly all manufacturers stopped producing Masonite siding and, in March 2001, the Masonite Corporation announced its decision to phase out production of all hardboard siding products.

Herein, How do I know if I have Masonite siding?

The best way to tell what type of siding is on your home, is to go to an unfinished area like the attic or garage, and pull back the tar paper from the back of the siding and look for markings. See if you can locate either the manufacturer's name or AHA code from the The American Hardboard Association.

When should I replace Masonite siding?

Blistering

When layers of wood particles separate, blisters can form in Masonite siding. If the siding gets soft and starts blistering, it's time to replace it.

45 related questions found

Do termites eat Masonite siding?

Inspect the outside of home for moisture problemsAn area that commonly rots and acts as harborage for termites is masonite siding. ... The moisture that has wicked inside the structure from the dirt above grade can allow termites to live without ground contact.

What is a good replacement for Masonite siding?

Fiber cement siding is the best material for replacing your masonite siding with. Fiber cement is made with a blend of cellulose fiber, Portland cement, sand, and silica. It's formed to look like real wood, with a natural-looking grain and texture. But, it's non-porous and resistant to moisture and insect activity.

Is Hardie board the same as Masonite?

Hardboard siding – also knows as pressboard, Masonite or hardboard siding – is a synthetic home siding product composed of a mixture of wood fibers, glues and resins, all bound together using heat and pressure.

Can you repair Masonite siding?

Masonite siding is primarily composed of wood fibers, glue resins and wax. ... Promptly repair holes in Masonite hardboard to prevent moisture from further permeating the siding and compromising its structural integrity. Fortunately, you can repair Masonite hardboard siding with wood putty.

How much is it to replace Masonite siding?

Masonite Siding Average Costs

For an average-sized home with 1,500 exterior square feet, the total cost might be $3,750 to $7,500. Materials to replace a 12 foot by 1 foot section of Masonite costs $10 to $20. Tubes of caulk cost $10 to $20 per tube. Acrylic or latex house paint costs $15 to $50 per gallon.

Does Home Depot sell Masonite?

Masonite - Doors & Windows - The Home Depot.

Is masonite the same as MDF?

Michele is right in that Masonite is a brand of hardboard, and MDF is a generic term for Medium Density Fiberboard. We also used something called MDO (Medium Density Overlay) in the bathroom, which is supposed to be more waterproof.

Does Masonite absorb water?

Masonite composite hardboard has a natural moisture resistance. When you install Masonite, the area of the hardboard penetrated by a fastener can absorb moisture. ... To avoid structural failure of a piece of installed Masonite, you need to waterproof the surface of the Masonite after installation.

What is the best low maintenance siding?

Low-Maintenance Siding Options
  • Vinyl Siding. The most popular siding used in the United States, vinyl is resistant to insects, heat, and cold. ...
  • Metal Siding. Aluminum metal siding is another very low-maintenance product that's been around since the 1930s. ...
  • Modified Wood. ...
  • Fiber Cement.

Is Masonite better than vinyl siding?

Masonite, commonly referred to as hardboard, is made of wood fibers, wax and resins compressed under high heat and pressure to form the boards. Unlike vinyl, it gives a warmer, wood texture and ambience to the home's exterior. ... But unlike wood, there is no swelling, blistering or splintering.

Is Hardie board siding worth it?

James Hardie siding is a great, environmentally friendly choice for overall curb appeal and home value. It will give your home a new look and feel to it. It is an attractive choice with guaranteed durability and quality. It provides an amazing return on investment.

What is the difference between fiber cement and Hardie board?

Fiber cement siding is often called “hardiplank” or even “hardie board” named from the most popular brand of fiber cement siding which is manufactured by James Hardie. ... It is also installed in much the same way as traditional lapboard or wood siding, as it is nailed directly to your home.

How much does it cost to replace Masonite siding with hardiplank?

Average cost: $1,200 - $9,000

Hardie board siding costs anywhere from $0.80 to $6.00 per square foot material installed on a home. If you were to replace an average size home with 1,500 square ft of materials you could expect to pay anywhere from $1,200 to $9,000 in replacement costs.

Is Hardie board more expensive than vinyl siding?

Cost. There is no doubt about it, the advantages of hardie board come with a cost. Vinyl siding is far less expensive, both in terms of the product itself and labor costs to install it. Part of the savings stems from the fact that vinyl is much easier to cut, work with, and install.