# How much does pea stone weigh?

Asked by: Amber Fox  |  Last update: 18 June 2021

A cubic yard of pea gravel weighs about 1.5 short tons, or about 3,000 pounds.

Simply so, How much does pea gravel weigh per pound?

Gravel, Pea weighs 1.79 gram per cubic centimeter or 1 788 kilogram per cubic meter, i.e. density of gravel, Pea is equal to 1 788 kg/m³. In Imperial or US customary measurement system, the density is equal to 111.62 pound per cubic foot [lb/ft³], or 1.03 ounce per cubic inch [oz/inch³] .

Similarly, it is asked, How many tons is pea gravel?. (A single cubic yard of pea gravel weighs about 1.3 short tons.)

Keeping this in consideration, How much does .5 cu ft pea gravel weigh?

5 pea gravel weigh? Roughly 45-50lb.

What is the volume of 1 ton of pea gravel?

Multiply 0.167 feet times 100 square feet to find the cubic footage of a ton of pea gravel with the density described in Step 1. The answer is 16.7 cubic feet.

19 related questions found

### What do you put under pea gravel?

Put down the base layer. Gravel composed of 3/4-inch crushed rock pieces mixed with rock dust works best. The crushed rock will add stability to the top layer of pea gravel. Use a garden rake to spread the material evenly to a depth of about 2 inches.

### How much gravel is in a ton?

A ton of gravel with average-sized pebbles is about 0.705 cubic yards, or 19 cubic feet, assuming it has been screened for debris and contains no leftover dirt, sand, etc.

### How much does a 50 lb bag of gravel cover?

Each 50-pound bag of QUIKRETE® All-Purpose Gravel contains approximately 0.5 cubic feet of gravel. To cover an area of 37 feet by 25 feet at 2 inches deep, you will need 154.2 cubic feet, or 309 50-pound bags.

### How do you keep pea gravel in place?

Preventing the Spread of Pea Gravel

The two most effective methods for stabilizing pea gravel are cement and permeable pavers. If you're stabilizing pea gravel with cement, it will hold for a while until it's eventually damaged by traffic and water exposure.

### How do you calculate pea gravel?

Measure the length, width and depth in feet of the area to be covered. Multiply the three numbers together. Divide by 27 to get the number of cubic yards of pea gravel needed. For example, if the area is 9 feet square and the gravel is to be a foot deep, multiply 9 by 9 by 1 to get 81.

### Can you use pea gravel under concrete?

Like crushed stone, pea gravel can also be used for underground projects, such as drainage and pipe bedding. ... If you're going to add it to a walkway or a flower bed, be sure that you have concrete blocks or landscape trim set up to keep the pea gravel in place.

### How many square feet does a 50 lb bag of gravel cover?

Consider a ½ cubic foot bag of stone or soil weighs about 50 lbs and will cover 2 square feet at 3" deep.

### How much pea gravel do I need for playground?

For example, Pea gravel requires a fill height of nine-inches to protect from a fall off equipment at five- feet. Therefore, a playground that has a five-foot equipment fall height should use a least 12-inches of pea gravel fill to safely work.

### Which is heavier sand or pea gravel?

If they are made of the same minerals, sand is heavier. It is just like a teaspoon of fine salt is twice as heavy as a teaspoon of coarse salt. Larger chunks means larger gaps. A liter of gravel contains much more air than a litre of sand.

### Does Lowes sell pea gravel?

Pea Gravel 50-lb Pea Gravel in the Landscaping Rock department at Lowes.com.

### How much is a dump truck full of gravel?

A truck load of gravel costs \$1,350 or more with a 10-yard minimum, including delivery and spreading based on the rock type, amount, truck size (double or tri-axle), and travel distance. Most rock-fill jobs use a 3-man crew plus a tractor for \$46 per hour that spread 12 cubic yards per hour.

### How much does a 25kg bag of gravel cover?

As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm.

### How much gravel is in a bag?

50 Pounds of Pea Gravel

A 50-pound bag of pea gravel is equivalent to 0.5 cubic foot, so two 50-pound bags cover 1 cubic foot.